A 14ml tinlet of (Matt) Enamel 'RLM 70 Schwartzgrun'.
Comments: Usage A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour) Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage 14ml tin covers approx. 0.3m² depending on thickness of application Application Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time Gloss: 1-2 hours Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel Thinners Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Safety Notice: Flammable. Repeated exposure may cause skin dryness or cracking. Vapour may cause drowsiness and dizziness. Contains cobalt octoate,methyl ethyl ketoxime. May produce an allergic reaction. Keep out of reach of children. Keep away from sources of ignition. No smoking . Use under adult supervision. if swollowed , wash mouth out with water. Do not induce vomiting. keep at rest and obtain medical attention.